PVC single core H05/H07V-K, fine wire
Single conductor wire electric H05/H07V-K
SNGLCONDWRE-H07V-K-GN-50,0SMM
Register now and access more than 125,000 products
- Devices
- Switchgears
- Distributors
- Protected routing, e.g. in lights.
- Installation in pipes (surface, inside and flush-mounted)
- Closed cable routing conduits
- Direct routing on trays, channels and tubs only as equipotential bonding conductor
- The following colours are recommended (single colour only): black, white, blue, grey, brown, red, orange, turquoise, violet and pink.
- Two-colour combinations are not permitted, except for green-yellow.
- Colours yellow, green and transparent only available in (H)07V-K.
- Two-colour combination only permitted for (H)07V-K.
- Approved for the internal wiring of devices, distributors and switchgears as well as for protected installation in and on lights with a rated voltage of up to 1000 V AC or a DC voltage of up to 750 V against ground.
Datasheets(X)
Wire cross section | 50 mm² |
Length | 50 m |
Diameter | 13.9 mm |
Material | Copper |
Insulating material | PVC |
Colour | Green |
Last viewed
Hexagonal bolt, fully threaded, SB fittings, DIN EN 15048-1
Screw, flattened half round head, with collar and hexagon socket assortment 1,153 pieces in system case 4.4.1. ISO 7380-2
Dry abrasive paper roll wood KP perfect KP perfect
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head with hexalobular drive
HSCo Longlife TiAlN+ red-ring machine tap for through holes DIN 371/376
Oil drain plug
Hexagon nut, low profile with fine thread DIN 439, steel, zinc-plated blue passivated (A2K)
Round head screw with square neck DIN 603, steel, strength class 8.8, zinc-plated, blue passivated (A2K)
Recess handle for insect protection
Countersunk screw with hexalobular head ISO 14581, A2-070 stainless steel, plain