PVC single core H05/H07V-K, fine wire
Single conductor wire electric H05/H07V-K
SNGLCONDWRE-H07V-K-RO-16,0SMM
Register now and access more than 125,000 products
- Devices
- Switchgears
- Distributors
- Protected routing, e.g. in lights.
- Installation in pipes (surface, inside and flush-mounted)
- Closed cable routing conduits
- Direct routing on trays, channels and tubs only as equipotential bonding conductor
- The following colours are recommended (single colour only): black, white, blue, grey, brown, red, orange, turquoise, violet and pink.
- Two-colour combinations are not permitted, except for green-yellow.
- Colours yellow, green and transparent only available in (H)07V-K.
- Two-colour combination only permitted for (H)07V-K.
- Approved for the internal wiring of devices, distributors and switchgears as well as for protected installation in and on lights with a rated voltage of up to 1000 V AC or a DC voltage of up to 750 V against ground.
Datasheets(X)
Wire cross section | 16 mm² |
Length | 100 m |
Diameter | 8.1 mm |
Material | Copper |
Insulating material | PVC |
Colour | Rosy |
Last viewed
Work dungarees
Twist drill bit HSS DIN 338 type RN 118°
Hexalobular-type cheese head screw, low head
HPC Speedcut 4.0 Universal end mill, extra long XL, optional, four blades, uneven angle of twist gradient, HA shank
E90 fire protection duct angle piece
Reserve taper grooved dowel pin ISO 8741 A1 stainless steel plain
Cheese head screw with hexagon socket ISO 4762, steel, strength class 10.9, zinc-nickel-plated, silver (ZNSHL)
Cylindrical pin with female thread DIN 7979, steel plain, hardened, tolerance class m6
Joint mortar CERAfix® 505 For natural-stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm
Ring grommet