PVC single core H05/H07V-K, fine wire
Single conductor wire electric H05/H07V-K
SNGLCONDWRE-H07V-K-VT-10,0SMM
Register now and access more than 125,000 products
- Devices
- Switchgears
- Distributors
- Protected routing, e.g. in lights.
- Installation in pipes (surface, inside and flush-mounted)
- Closed cable routing conduits
- Direct routing on trays, channels and tubs only as equipotential bonding conductor
- The following colours are recommended (single colour only): black, white, blue, grey, brown, red, orange, turquoise, violet and pink.
- Two-colour combinations are not permitted, except for green-yellow.
- Colours yellow, green and transparent only available in (H)07V-K.
- Two-colour combination only permitted for (H)07V-K.
- Approved for the internal wiring of devices, distributors and switchgears as well as for protected installation in and on lights with a rated voltage of up to 1000 V AC or a DC voltage of up to 750 V against ground.
Datasheets(X)
Wire cross section | 10 mm² |
Length | 100 m |
Diameter | 6.8 mm |
Material | Copper |
Insulating material | PVC |
Colour | Violet |
Last viewed
Low-cut safety shoes, S3
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
Locking system DUAL
Ratchet strap For airline profile
Hexagon socket set screw with ring cutter ISO 4029, A2 stainless steel, 21H, plain
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Spray tube For fire protection foam FZ plus
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc flake, silver (ZFSHL)
Sealing plug GPN 300 F Polyethylene (PE-LD), black
Taper-grooved dowel pin ISO 8745 steel plain