PVC single core H05/H07V-K, fine wire
Single conductor wire electric H05/H07V-K
SNGLCONDWRE-H07V-K-WE-50,0SMM
Register now and access more than 125,000 products
- Devices
- Switchgears
- Distributors
- Protected routing, e.g. in lights.
- Installation in pipes (surface, inside and flush-mounted)
- Closed cable routing conduits
- Direct routing on trays, channels and tubs only as equipotential bonding conductor
- The following colours are recommended (single colour only): black, white, blue, grey, brown, red, orange, turquoise, violet and pink.
- Two-colour combinations are not permitted, except for green-yellow.
- Colours yellow, green and transparent only available in (H)07V-K.
- Two-colour combination only permitted for (H)07V-K.
- Approved for the internal wiring of devices, distributors and switchgears as well as for protected installation in and on lights with a rated voltage of up to 1000 V AC or a DC voltage of up to 750 V against ground.
Datasheets(X)
Wire cross section | 50 mm² |
Length | 50 m |
Diameter | 13.9 mm |
Material | Copper |
Insulating material | PVC |
Colour | White |
Last viewed
Threaded sleeve For rivet nut setting pliers HES 510
WLH S cordless LED hand-held lamp without spare rechargeable battery for art. no. 0827940410
Panic pin, split, 9 mm with drill hole at front and longitudinal groove
1C foam gun PURlogic® Xpress For professional application of 1-component gun foams
Universal cleaner R1
BASIC 8.8 system workshop trolley
Countersunk screw with hexalobular head
Grooved cylindrical pin with chamfer ISO 8740, A1 stainless steel
1/2 inch socket wrench insert, metric
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive