Paint retouching pen - RETCHPEN-LACQUER-DEEPBLACK-11G

Paint retouching pen

Name: Paint retouching pen
Brand: Würth
SKU: 0890403510

Retouching pen
RETCHPEN-LACQUER-DEEPBLACK-11G

Art.-no. 0890403510

EAN 4052712342431

All versions

Similar products

Prices for customers after login

Paint retouching pen

Art.-no. 0890403510

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service:

For recolouring and covering edges and scratches as well as for pre-colouring damaged areas. A sprung pen tip provides an even flow of paint and therefore optimum results.

Easy and quick to apply

No brush and paint pot required

Ready to use immediately and quick-drying

Wide range of colours

Matching colours for a wide range of different wood colours.

Good adhesion

Adheres to many surfaces, making it suitable for universal use

Resistant to smearing and scratch-resistant

Suitable for indoor and outdoor use

Notice

The paint retouching pens are not refillable.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For recolouring and covering edges, scratches, chafe marks, minor touch-up defects as well as correcting wood colours. Optimised paint quality for a continuous flow of paint. For both indoor and outdoor use.

Instructions

Shake the pin for approx. 30 seconds before use. The stirring balls must be clearly audible. Remove the pen lid and hold the pen with the tip pointing upwards. The pen is audibly vented by briefly pressing on "P". Then point the tip downwards to activate the pen. The tip is slowly filled with paint by carefully pressing on "P". Apply light pressure to use the pen at a flat angle (approx. 45°). The valve opens and the paint flows evenly and continues to do so. During application, avoid pressing on "P", as this can lead to an uncontrolled flow of paint.

Thanks to the shape of the tip, it is also easy to work hard-to-reach areas (corners, narrow areas) with precision.

Chemical basis	Acrylic resin
Colour	Jet black, similar to RAL 9005
Density	0.94 g/cm³
Density conditions	at 20°C
Min. dust-drying time	1 min
Max. dust-drying time	2 min
Conditions for dust-drying time	depending on room temperature and layer thickness
Min. grip strength	2 min
Max. grip strength	5 min
Grip strength conditions	depending on room temperature and layer thickness
Min. flashing point	19 °C
Ignition temperature	350 °C
Water-soluble	No
Light-fastness	Good
Weight of content	11 g
Shelf life from production	0 Month