Paint tarpaulin LDPE fabric
Painter's tarpaulin Low Density polyethylene
COVFLM-LDPE-16MY-20SM
Register now and access more than 125,000 products
Advantage of LDPE quality:
LDPE (low-density polyethylene) films are softer and more supple than HDPE films. On account of their increased flexibility/elasticity, LDPE films have greater tear resistance.
The melting point of LDPE films is between 105–118°C. Polyethylene films protect against all standard types of paint and varnish. However, the solvents contained migrate through the film after prolonged exposure. However, the mechanical characteristics are barely affected by this migration.
The film is not resistant to UV. which means that the film must be protected from UV radiation. If exposed to UV light, the product loses its mechanical properties in as little as approx. 1-2 months.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
For covering large areas of floors, components and equipment that need to be protected from moisture, dust, paint etc. during renovation and painting work.
With tarpaulins, the first step is to tear off and remove the packaging. Unfold the folded tarpaulin, and the tarpaulin is ready to use. Generally, cover films are designed to be used just the once. However, depending on the amount of soiling, they can be used more than once. Store in a dry place and at room temperature.
Material | LDPE - Low density polyethylene |
Length | 5 m |
Width | 4 m |
Area | 20 m² |
Coating weight per m² | 15 g |
Min. processing temperature | 10 °C |
Max. processing temperature | 30 °C |
Min. temperature resistance | -15 °C |
Max. temperature resistance | 60 °C |
Tensile strength | 16 N/mm² |
Min. transverse tensile strength | 16 N/mm² |
Elongation at break | 180 % |
Diagonal elongation at break | 390 % |
Min. impact resistance at 1 µm (dart drop) | 1.5 g |
Ultraviolet resistance | No |
Colour | Transparent |
Container | Tarp |
Foil thickness | 16 µm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Cup holder
Mud flap for rear apron
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Stick-on cover cap
Low-cut safety shoe S3
Rubber Eraser
ECO hard swivel machinery castor, with locking device and bolt hole
Jointed handle For professional aluminium telescopic ladders
Cetus trousers with holster pockets
Pin punch In accordance with DIN 6450 form C with hardened impact head