Welcome to Würth Aerospace Solutions For trade customers only

Paintable ablation coating for use in system C3

Ablation coating I paintable
ABLATCOAT-SCRT-BCKT-12,5KG

Art.-no. 0893303016
EAN 4099618338670

Prices for customers after login
Paintable ablation coating for use in system C3

Art.-no. 0893303016

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Universally applicable and paintable ablation coating as a protective coating for a wide range of media in the partition system
  • Easy application: by painting, with trowel or airless spraying

  • Solvent-free and halogen-free

  • Resistant to moisture, for indoor and outdoor use

  • Resistant to frost-thaw cycles

  • Insensitive to UV radiation

  • Resistant to various oils and chemicals

  • Free of toxic fumes

  • Mechanically resistant
Notice
  • Storage: Protect from frost. Storage at room temperature (+5 °C to +30 °C)

  • The base material must be dry and free from dust or grease

  • Spray processing/airless sprayer: (Nozzle bore 0.019 inch = 0.48 mm), stir with maximum of 2 % addition of water

ETA-17/0105 / Z-19.53-2677

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

For use in system [C3]


  • Combi AB soft partition


  • Use in system C3 as a subsequent coating component of the media/partition surface

  • The endothermic, weather-resistant fire protection coating is particularly suitable for large-area and high-build application quantities/layers.

  • Apply with brush, roller, joint knife or airless sprayer

  • Ideal application at +5 °C to +30 °C and a relative humidity of less than 85 %

  • Drying time at least four hours
Instructions
  • 1. Clean opening

  • 2. Stir the ablation coating to a brushable consistency

  • 3. Coat necessary media

  • 4. Coat the partition surface/AB pre-coated mineral fibre board

Container

Bucket

Weight of content

12.5 kg

Colour

White

Conditions to maintain shelf life from production

at 5°C to 30°C

Shelf life from production

18 Month

Moulded density

1.34 g/cm³

Ultraviolet resistance

Yes

Density

1.34 g/cm³

Contents

12.5 l

Resistance against

Humidity
Thawing-freezing alternations
UV radiation
Oil

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information