Paintable ablation coating for use in system C3
Ablation coating I paintable
ABLATCOAT-SCRT-BCKT-5KG
Art.-no.
0893303017
EAN 4099618338663
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
Universally applicable and paintable ablation coating as a protective coating for a wide range of media in the partition system
- Easy application: by painting, with trowel or airless spraying
- Solvent-free and halogen-free
- Resistant to moisture, for indoor and outdoor use
- Resistant to frost-thaw cycles
- Insensitive to UV radiation
- Resistant to various oils and chemicals
- Free of toxic fumes
- Mechanically resistant
Proof of Performance
ETA-17/0105 / Z-19.53-2677
Notice
- Storage: Protect from frost. Storage at room temperature (+5 °C to +30 °C)
- The base material must be dry and free from dust or grease
- Spray processing/airless sprayer: (Nozzle bore
0.019 inch = 0.48 mm), stir with maximum of 2 % addition of water
| Example application of ablative coating I, brushable surface coating | Application quantity [g/m³] | Coat thickness [mm] | |
| wet | dry | ||
| 2000 | approx. 1.8 | approx. 1.0 | |
| 3200 | approx. 2.9 | approx. 1.6 | |
| 4000 | approx. 3.6 | approx. 2.0 | |
| 1000 | approx. 0.9 | approx. 0.5 | |
ETA-17/0105 / Z-19.53-2677
Application area
For use in system [C3]
- Combi AB soft partition
- Use in system C3 as a subsequent coating component of the media/partition surface
- The endothermic, weather-resistant fire protection coating is particularly suitable for large-area and high-build application quantities/layers.
- Apply with brush, roller, joint knife or airless sprayer
- Ideal application at +5 °C to +30 °C and a relative humidity of less than 85 %
- Drying time at least four hours
Instructions
- 1. Clean opening
- 2. Stir the ablation coating to a brushable consistency
- 3. Coat necessary media
- 4. Coat the partition surface/AB pre-coated mineral fibre board
Container | Bucket |
Weight of content | 5 kg |
Colour | White |
Conditions to maintain shelf life from production | at 5°C to 30°C |
Shelf life from production | 18 Month |
Moulded density | 1.34 g/cm³ |
Ultraviolet resistance | Yes |
Density | 1.34 g/cm³ |
Contents | 5 l |
Resistance against | Humidity, Thawing-freezing alternations, UV radiation, Oil |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
