Paintwork finishing hammer
Body smoothing hammer
PANBETHAM-BDYWRK-D12MM-HANDLE200MM
Register now and access more than 125,000 products
With its specially shaped and polished striking surface, the hammer can be used to carefully straighten bulges or over-pulled dents
The striking surface is not chrome-plated to prevent chipping. Therefore, the hammer must always be lubricated after use. Tool marks can be rectified with a high-gloss polish.
Face diameter (hammer) (Ø) | 12 mm |
Length of handle | 200 mm |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Hexagon nut with fine thread DIN 934, steel I10I, zinc-nickel (P3E)
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc-plated, blue passivated (A2K)
Tungsten carbide bur with MX teeth
Corrugated pipe PA12-MOD/V0
Lock washer with right-angle cross-section, shape B DIN 127, A2 stainless steel, plain
Twist drill bit, metal Ruko DIN 338 type N HSS-G plain 118°
Hexagon nut, low profile, with clamping piece (non-metal insert)
EPS profile thumbturn cylinder
Centre-grooved dowel pins ISO 8742 steel plain
Low-cut safety shoes, S1
