Pan head screw, imperial
ASME B18.6.3 stainless steel 18-8 rec head H UNF
SCR-MS-PN-(18-8)-PH-10_32X5/16
Register now and access more than 125,000 products
1 INCH (in) = 25.4 mm
18-8 is comparable with an A2 stainless steel
Datasheets(X)
 | |
Nominal diameter (d1) | 0.19 in |
Length (l1) | 0.3125 in |
Internal drive | H |
Standards | ASME B18.6.3 |
Material | Stainless steel AISI 304, 18-8 |
Surface | Plain |
Head type | Pan head |
Thread type | UNF |
Last viewed
Brazing solder no. 5 DIN EN 1044, ISO 3677, B-Cu89PAg
ASME B18.6.3 high-grade steel 18-8 plain
Hard decorating trowel made of hard, shatterproof plastic
Hexagonal bolt with flange in accordance with MBN standard
Red brass extensions With DVGW (German Technical and Scientific Association for Gas and Water) GW 393 approval (sizes from ½ inch x 17.5 mm)
Plug-in connector, wood/wood
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Support shell for pipes
Serrated locking nut A2 stainless steel, plain
Insoles in 3 widths