Pan head screw with hexalobular socket ISO 14583, A4-70 stainless steel, plain, with 3.1 certificate
ISO 14583 sst A4 plain w. 3.1 certificate
Q/SCR-ISO14583-A4-TX8-M2,5X6+3.1
Register now and access more than 125,000 products
Increased assembly productivity
When using hexalobular-drive (TX) fasteners, the power is transmitted over a large surface area across the flanks of the drive rather than being centred on one point, as is the case with hexagon socket drives, for example. This has a number of advantages:
- Reduced tool wear
- Tool does not slip because power is distributed optimally
- No damage to surface coating
- No wobbling
- Screw locates securely
Hexalobular drives must comply with DIN EN ISO 10664
- As a result, fasteners with hexalobular sockets are standardised and can be used all over the world
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M2.5 |
Length (l1) | 6 mm |
Head diameter (dk) | 5 mm |
Head height (k1) | 2.1 mm |
Standards | ISO 14583 |
Material | Stainless steel A4 |
Surface | Plain |
Head type | Flat head |
Drive type | Internal hexalobular |
Internal drive | TX8 |
Thread type | Metric thread |
Pitch | 0.45 |
Thread design | Full thread |
Last viewed
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
Universal holder Ø 7 mm With stainless steel sleeve, snap ring and permanent magnet
Sidewall lining
Adapter plate, round for quick-action clamps
Cylindrical pin, unhardened ISO 2338 M6 A4 stainless steel plain
Safety boots, S3
System workbench 2000 mm with 2 drawer undercounter cabinets 8.6
Pressure roller EUROFAST Brass
Cylindrical roller bearing FAG
Spacer stud, polyamide, hex, F/M