Pan head tapping screw, shape C with Z recessed head DIN 7981, A2 stainless steel, plain, PZ drive, shape C
DIN 7981 A2 stainless steel, Z pan head, shape C
SCR-PANHD-DIN7981-C-Z2-A2-4,2X32
Register now and access more than 125,000 products
Tapping screws belong to the thread-moulding screw family. When screwed into a pre-prepared core hole, these screws shape their own counter-thread.
Guideline values for selecting the correct core hole diameter are contained in DIN 7975.
Shape C = thread with tip
Shape F = thread without tip
Shape R = thread with rounded tip
Stainless steel tapping screws are weaker than case-hardening steel tapping screws. This means that these screws cannot form a counter thread in sheet steel. For this reason, they are used in soft materials such as aluminium only.
Datasheets(X)
CAD data (available after login)
 | |
Material | Stainless steel A2 |
Surface | Plain |
Form | C |
Nominal diameter (d1) | 4.2 mm |
Length (l1) | 32 mm |
Head diameter (dk) | 8.2 mm |
Head height (k1) | 3.05 mm |
Internal drive | Z2 |
DIN | 7981 |
Head type | Pan head |
Declaration of performance (EU-CPR) | No |
Standards | DIN 7981 |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Shape of tip | C |
Last viewed
Stand multi-bit screw attachment VSG 48 DB For effortless processing of collated thin sheet metal screws DBS
Aluminium bracket
Rust remover Rost-Off
Intermediate layer for ISO D clamping system
Hexagonal bolt, fully threaded, SB fittings, DIN EN 15048-1
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Stud with threaded end ≈ 1.25 d DIN 939, A4 stainless steel, plain
Lock with 2 keys for WE series workshop trolleys and WE system assembly workbenches
Hexagonal bolt with shank
Work dungarees