Pan head tapping screw, shape F with recessed head DIN 7981, steel, nickel-plated (E2J), round head, PH drive, shape F
DIN 7981 steel nickel-plated round head H shape F
SCR-PANHD-DIN7981-F-H1-(E2J)-2,9X6,5
Register now and access more than 125,000 products
Tapping screws belong to the thread-moulding screw family. When screwed into a pre-prepared core hole, these screws shape their own counter-thread.
Guideline values for selecting the correct core hole diameter are contained in DIN 7975.
Shape C = thread with tip
Shape F = thread without tip
Shape R = thread with rounded tip
Datasheets(X)
 | |
Material | Steel |
Surface | Nickel plated |
Form | F |
Nominal diameter (d1) | 2.9 mm |
Length (l1) | 6.5 mm |
Head diameter (dk) | 5.6 mm |
Head height (k1) | 2.2 mm |
Internal drive | H1 |
DIN | 7981 |
Head type | Pan head |
Head details | 0 - not applicable |
Declaration of performance (EU-CPR) | No |
Standards | DIN 7981 |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Shape of tip | F |
Last viewed
Stud with threaded end ≈ 1.25 d DIN 939, steel 5.8, plain
Hexagonal bolt with thread up to head ISO 4017, steel 10.9, zinc-plated thick-film passivated (ZSML)
Double cylinder S5 locking system
Office scissors
Top bracket latch for insect protection
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain
Partitioning set For ORSY® system case 8.4.3
Filter For random orbital sanders ETS 150-3.0-E Power and 150-5.0-E POWER
Hexagonal bolt with flange in accordance with MBN standard
S3 safety shoe Base B1208B