Pan head tapping screw, shape F with recessed head DIN 7981, steel, nickel-plated (E2J), round head, PH drive, shape F
DIN 7981 steel nickel-plated round head H shape F
SCR-PANHD-DIN7981-F-H2-(E2J)-3,5X9,5
Register now and access more than 125,000 products
Tapping screws belong to the thread-moulding screw family. When screwed into a pre-prepared core hole, these screws shape their own counter-thread.
Guideline values for selecting the correct core hole diameter are contained in DIN 7975.
Shape C = thread with tip
Shape F = thread without tip
Shape R = thread with rounded tip
Datasheets(X)
 | |
Material | Steel |
Surface | Nickel plated |
Form | F |
Nominal diameter (d1) | 3.5 mm |
Length (l1) | 9.5 mm |
Head diameter (dk) | 6.9 mm |
Head height (k1) | 2.6 mm |
Internal drive | H2 |
DIN | 7981 |
Head type | Pan head |
Head details | 0 - not applicable |
Declaration of performance (EU-CPR) | No |
Standards | DIN 7981 |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Shape of tip | F |
Last viewed
Hex head screw with thread up to head DIN 933, steel 8.8U, hot-dip galvanised (hdg)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A4-80 stainless steel, plain
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Work vest
Slotted cheese head DIN 84, steel 4.8, nickel-plated (E2J)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Countersunk slotted head screw, Z DIN 965, steel 4.8, plain
Hexagon socket set screw with ring cutter ISO 4029, steel, 45H, plain
Work polo shirt
Work jacket