Pan head tapping screw, shape F with recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), round head, PH drive
DIN 7981 steel zinc-plated round head H shape F
SCR-PANHD-DIN7981-F-H2-(A2K)-3,5X22
Register now and access more than 125,000 products
Tapping screws belong to the thread-moulding screw family. When screwed into a pre-prepared core hole, these screws shape their own counter-thread.
Guideline values for selecting the correct core hole diameter are contained in DIN 7975.
Shape C = thread with tip
Shape F = thread without tip
Shape R = thread with rounded tip
Datasheets(X)
 | |
Material | Steel |
Surface | Zinc plated |
Form | F |
Nominal diameter (d1) | 3.5 mm |
Length (l1) | 22 mm |
Head diameter (dk) | 6.9 mm |
Head height (k1) | 2.6 mm |
Internal drive | H2 |
DIN | 7981 |
Head type | Pan head |
Standards | DIN 7981 |
Thread type | Self-tapping screw thread |
Shape of tip | F |
Last viewed
Non-woven sanding belt For tube belt sander
Aluminium clamping rods
Work dungarees
Hexagon socket set screw with flattened tip ISO 4027, A4 stainless steel, 21H, plain
Hexagonal bolt with shank DIN 931, steel 12.9, plain
Clamp washer
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, plain
Suction bell
PRINETO® Cuphin adapter fitting with internal thread
Safety boots, S3