Pan head tapping screw, shape F with recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), round head, PH drive
DIN 7981 steel zinc-plated round head H shape F
SCR-PANHD-DIN7981-F-H2-(A2K)-4,8X16
Register now and access more than 125,000 products
Tapping screws belong to the thread-moulding screw family. When screwed into a pre-prepared core hole, these screws shape their own counter-thread.
Guideline values for selecting the correct core hole diameter are contained in DIN 7975.
Shape C = thread with tip
Shape F = thread without tip
Shape R = thread with rounded tip
Datasheets(X)
CAD data (available after login)
 | |
Material | Steel |
Surface | Zinc plated |
Form | F |
Nominal diameter (d1) | 4.8 mm |
Length (l1) | 16 mm |
Head diameter (dk) | 9.5 mm |
Head height (k1) | 3.55 mm |
Internal drive | H2 |
DIN | 7981 |
Head type | Pan head |
Declaration of performance (EU-CPR) | No |
Standards | DIN 7981 |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Shape of tip | F |
Last viewed
Fire protection duct outer corner I30/I60/I90/I120
Electric strike, type R
Clothes hook, conical
Twist drill bit HSCo DIN 338 MFD Speed
Twist drill bit HSS DIN 1869 R2 type RN
Stud with threaded end ≈ 2d
Bolt with head ISO 2341, shape B, A2 stainless steel, plain
Half-height separator For W-SLB system storage box
Rechargeable battery for ULTRA GRIP 40 wire tie machine
Hexagon socket set screw with flattened tip ISO 4027, A2 stainless steel, 21H, plain