Pan head tapping screw, shape F with recessed head Z DIN 7981, steel, zinc-plated, blue passivated (A2K), PZ drive, round head, shape F
DIN 7981 steel ZN plat. pan head tap. scr. Z shape F
SCR-PANHD-DIN7981-F-Z1-(A2K)-2,2X13
Register now and access more than 125,000 products
Tapping screws belong to the thread-moulding screw family. When screwed into a pre-prepared core hole, these screws shape their own counter-thread.
Guideline values for selecting the correct core hole diameter are contained in DIN 7975.
Shape C = thread with tip
Shape F = thread without tip
Shape R = thread with rounded tip
Datasheets(X)
 | |
Material | Steel |
Surface | Zinc plated |
Form | F |
Nominal diameter (d1) | 2.2 mm |
Length (l1) | 13 mm |
Head diameter (dk) | 4.2 mm |
Head height (k1) | 1.8 mm |
Internal drive | Z1 |
DIN | 7981 |
Head type | Pan head |
Head details | 0 - not applicable |
Declaration of performance (EU-CPR) | No |
Standards | DIN 7981 |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Shape of tip | F |
Last viewed
Hexagonal bolt with thread up to the head
High-visibility trousers
VDE 3/8 inch socket wrench, metric, hexagon, short
Dent lifter pulling piece
pias® drilling screw, flat head with AW drive
Grooved taper-pin ISO 8744 A1 stainless steel plain
Threaded rod DIN 976, A2-70 stainless steel, shape A
Base frame ORSY®Flex
ASSY® 4 COMBI timber screw Steel zinc plated partial thread hexagon head
ASSY® 4 CSMP universal screw collated Steel zinc plated partial thread countersunk milling pocket head