Pan head tapping screws with recessed head H
ISO 7049 steel zinc nickel black H shape C
SCR-PANHD-ISO7049-C-H1-(ZNBHL)-2,9X22
Register now and access more than 125,000 products
Tapping screws belong to the thread-moulding screw family. When screwed into a pre-prepared core hole, these screws shape their own counter-thread.
Guideline values for selecting the correct core hole diameter are contained in DIN 7975.
Shape C = thread with tip
Shape F = thread without tip
Shape R = thread with rounded tip
Datasheets(X)
 | |
Material | Steel |
Property class | 0 - not applicable |
Surface | Zinc nickel black |
Form | C |
Nominal diameter (d1) | 2.9 mm |
Length (l1) | 22 mm |
Head diameter (dk) | 5.6 mm |
Head height (k1) | 2.4 mm |
Internal drive | H1 |
DIN | 0 - not applicable |
Head type | Pan head |
Head details | 0 - not applicable |
Standards | ISO 7049 |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Shape of tip | C |
| Thread size | St 2.2 | St 2.9 | St 3.5 | St 3.9 | St 4.2 | St 4.8 | St 5.5 | St 6.3 | St 8 | St 9.5 |
| Min. sheet thickness (mm) | 0,8 | 1,1 | 1,3 | 1,3 | 1,4 | 1,6 | 1,8 | 1,8 | 2,1 | 2,1 |
| Max. sheet thickness (mm) | 1,8 | 2,2 | 2,8 | 3 | 3,5 | 4 | 4,5 | 5 | 6,5 | 7,5 |
| Pre-drilling diameter (mm) | 1,2 | 2,1 | 2,6 | 2,8 | 3,0 | 3,5 | 4,1 | 4,7 | 6,1 | 7,7 |
Last viewed
Low-cut safety shoe S3
Hexagon nut, low profile ISO 4035 steel 04, zinc-plated blue passivated (A2K)
Special tool - pressure loss tester
MG-A 11 bow-shaped designer furniture handle Made of stainless steel
Cylindrical pin with female thread DIN 7979, steel plain, hardened, tolerance class m6
Safety shoe S1P Jalas 9518
Double cylinder S5 locking system
ORSY®BULL partition elements For dividing ORSY®BULL top loader boxes according to individual requirements
Hexagon head bolt With thread up to head, structural bolting assembly, DIN EN 15048-1
Pneumatic rod grinder RUKO 116100L, short