Pan head tapping screws with recessed head H
ISO 7049 steel zinc nickel silver H shape C
SCR-PANHD-ISO7049-C-H2-(ZNSHL)-4,2X9,5
Register now and access more than 125,000 products
Tapping screws belong to the thread-moulding screw family. When screwed into a pre-prepared core hole, these screws shape their own counter-thread.
Guideline values for selecting the correct core hole diameter are contained in DIN 7975.
Shape C = thread with tip
Shape F = thread without tip
Shape R = thread with rounded tip
Datasheets(X)
 | |
Material | Steel |
Surface | Zinc nickel silver |
Form | C |
Nominal diameter (d1) | 4.2 mm |
Length (l1) | 9.5 mm |
Head diameter (dk) | 8 mm |
Head height (k1) | 2.80 mm |
Internal drive | H2 |
Head type | Pan head |
Standards | ISO 7049 |
Thread type | Self-tapping screw thread |
Shape of tip | C |
Last viewed
Taper-grooved dowel pin DIN 1471, A1 stainless steel, plain
Y-connector, PA6 MOD BS SGA
Safety boots, S1
Universal protector W.TEC® COVER CAP WP 600 Polyethylene, red
Cut-resistant glove Ejendals TEGERA® 803
Round head screw with square neck DIN 603, A4 stainless steel
Manual taper tap Ruko hand tap HSS DIN 2181 UNF taper tap
pias® drilling screw, countersunk head with AW drive
Carriage For the DS 180 core drill
Hexagon head bolt with thread up to head