Pan head tapping screws with recessed head ISO 7049, steel, zinc-plated (A2K)
ISO 7049 steel zinc plated pan head H shape C
SCR-PANHD-ISO7049-C-(A2K)-H2-4,2X32
Register now and access more than 125,000 products
Datasheets(X)
 | |
Material | Steel |
Surface | Zinc plated |
Form | C |
Nominal diameter (d1) | 4.2 mm |
Length (l1) | 32 mm |
Head diameter (dk) | 8 mm |
Head height (k1) | 3.1 mm |
Internal drive | H2 |
Head type | Pan head |
Declaration of performance (EU-CPR) | No |
Standards | ISO 7049 |
Thread type | Male thread |
Thread design | Full thread |
Shape of tip | C |
Last viewed
Divider assortment With compartment rails and compartment dividers for system dimensions 12.8
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Type 80 staples
Low-cut safety shoes S3
GEFU® thread-rolling screw With Taptite 2000® thread, flat head with hexalobular drive
90-degree BRK connector with bulkhead fitting
Slotted countersunk head screw ISO 2009, steel 4.8, zinc-plated, blue passivated (A2K)
Clamping pin/clamping sleeve ISO 13337 spring steel plain
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Cetus fleece jacket