Panic pin, split, 9 mm with drill hole at front and longitudinal groove
Panic pin with front-end bore
AY-PANIC-PIN-DRFRN-ST-(ZN)-9X60X85MM
Register now and access more than 125,000 products
- The panic pins are split and used to connect two door handles on a panic door
- This connection element moves the safety catch
- Due to different door thicknesses and penetration depths in the door handles, these spindles are required in different lengths
- For locks with split bolt
Observe the lock position when selecting the pin lengths. Please note that the fastening screws for the fittings must also be changed when using shorter or longer panic pins. The pins are marked according to fire protection standards.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
A grub screw with pin is used for fixing in place. This involves the pin cutting into the pin groove.
 | |
Suitable for door handle | DH A 502 FS |
Material | Steel |
Surface | Zinc plated |
Length 2 (L1) | 60 mm |
Length 3 (L2) | 85 mm |
Length (L) | 145 mm |
Square size | 9 mm |
DIN direction | DIN R/L |
Standards | DIN 18273 |
Last viewed
Straight male fitting ISO 8434-1, stainless steel 1.4571, metric male thread with metallic sealing edge, shape B
Raised countersunk head tapping screw, shape C with hexalobular socket
Base height adjuster type EV-S for screwing on With electrical height adjustment using optional cordless pliers
Hexagon tapping screw, shape C ISO 1479 zinc-plated steel, blue passivated (A2K)
Spare direct jet spray head With extension tube for REFILLO® cans
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
Split pin ISO/WN 1234 steel zinc-plated
Crimping tool Mobile Crimp Tool For replaceable crimping inserts
G-fuse 5x20
Plastic base