Panic pin, split, 9 mm with drill hole at front and longitudinal groove
Panic pin with front-end bore
PANCPIN-F.DRFRN-ST-(ZN)-9X65X80MM
Register now and access more than 125,000 products
- The panic pins are split and used to connect two door handles on a panic door
- This connection element moves the safety catch
- Due to different door thicknesses and penetration depths in the door handles, these spindles are required in different lengths
- For locks with split bolt
Observe the lock position when selecting the pin lengths. Please note that the fastening screws for the fittings must also be changed when using shorter or longer panic pins. The pins are marked according to fire protection standards.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
A grub screw with pin is used for fixing in place. This involves the pin cutting into the pin groove.
 | |
Suitable for door handle | DH A 502 FS |
Material | Steel |
Surface | Zinc plated |
Length 2 (L1) | 65 mm |
Length 3 (L2) | 80 mm |
Length (L) | 145 mm |
Square size | 9 mm |
DIN direction | DIN R/L |
Standards | DIN 18273 |
Last viewed
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Round head screw with square neck
Hanging basket 90° For floor unit full-extension slide VS SUB Side, body width 150 mm
Long-life & speed diamond wet core bit 1 1/4 inch
Countersunk head screw with recessed head, H DIN 965, A4 stainless steel, plain
KALTSCHMELZ® device KSG-E Caravan For adhesive-free insertion of variably positionable plastic anchors into frameless lightweight panels
Video endoscope PRO Dual For optimal examination and documentation in inaccessible places via video recording and/or imaging
Hexagon socket set screw with flattened tip ISO 4027, steel 45H, zinc flake, silver (ZFSHL)
ASME B18.8.1 steel zinc-plated
Paper towel dispenser, V-fold