Parallel pin with chamfered ends DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h11
DIN 7 h11 plain steel
PIN-CYL-DIN7-UNHDND-H11-5X50
Register now and access more than 125,000 products
DIN 7 was withdrawn and superseded by DIN EN ISO 2338 (changes made to length definition and end heights).
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 5 mm |
Length (l1) | 50 mm |
Height of flat point (c) | 0.75 mm |
Standards | ISO 2338, DIN 7 |
Material | Steel |
Surface | Plain |
Design | Unhardened |
Tolerance class | h11 |
RoHS-compliant | Yes |
Last viewed
Hexagonal bolt with thread up to the head DIN 933, steel 10.9, zinc-plated, blue passivated (A2K)
Slotted countersunk head screw DIN 963, 4.8 steel, plain
Trousers Stretch X
Snap ring for bearing with ring groove
Slotted countersunk head screw DIN 963, 4.8 steel, plain
Rubber grommets made of polychloroprene rubber Insulating sleeves CR
Hexagonal bolt with thread up to the head DIN 933, steel 10.9, zinc-plated, blue passivated (A2K)
Safety shoe S3
Mini cutter HSCo8 short, triple blade, centre-cutting
Protective glove Big ATG 42-874