Parking sensor tool set, BMW 7 pieces
Parking sensor tool set, BMW, 7 pieces
PARKSENSOTL-SET-BMW-7PCS
Art.-no.
1952004340
EAN 4056807820545
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
Enables professional retrofitting of parking sensors or their installation in a new bumper, if, for example, it needs to be replaced after an accident, provided no location hole is present ex works.
- Supplied with centring mandrels, which are needed to position the sensor holder precisely in the hole centre, then allowing bonding.
- The quality hole punches ensure precise work results and produce clean and burr-free hole edges. This ensures that the original look is maintained after the repair.
Scope of delivery:
- 1x hole punch/centring pin set, 2 pieces, diameter 18.0 mm
- 1x hole punch/centring pin set, 2 pieces, diameter 32.0 mm
- 1x hole punch, diameter 32.5 mm (supplied without centring pin due to oblique installation position of the sensor)
- 1 x hole punch drive, 3/8 inch, with ball bearing
- 1 x drill, diameter 10 mm
Product information
Datasheets(X)
Product weight (per item) | 903.400 g |
Last viewed
Thread die HSS DIN EN 22568 for standard metric ISO threads
Work trousers
Low-cut safety shoes, S2
Cast wheel With rubber coating. For protecting delicate workshop flooring
Akura 44 profile thumbturn cylinder
Natural stone sealant 4 in 1
Board wreath For WÜRTH Tower/WÜRTH Tower Plus
VARIFIX® C-mounting rail 41/86
Blancodelta sink For body width from 700 mm or corner unit min. 900 x 900 mm
Hexagonal cap nut with clamping piece (non-metallic insert)