PinPuller® power pulling electrode
Pulling electrode PinPuller Power 15 straight
PULLELTRD-F.PINPULLER-POWER-15FOLD
PIN PULLER
Register now and access more than 125,000 products
Broad range of applications
- Heavy slide hammer
- Pulling attachment for straightening jig
- Pulling bar
Suitable for universal use
Optimum power distribution with numerous electrodes in 2 rows at very short intervals
No bump formation, no unnecessary material weakening
In contrast to wiggle wire, pin electrodes can be welded on more than 1000 times
Effective and economical
Thanks to the insulated bearing of each electrode, only minimal welding power is required
Low heat input into sheet metal
Individual electrodes are quick to weld on and easy to remove by twisting
Saves valuable working time
Datasheets(X)
Especially for small and deep areas of damage and for levelling wheel arches
Design | Straight |
Number of rows | 2 PCS |
Number of electrodes | 15 PCS |
Product weight (per item) | 178 g |
Last viewed
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Façade membrane WÜTOP® insulated façade for wind and rainproof façade constructions
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
BSD drill rod anchor
Stretch X trousers
Countersunk head screw with recessed head, H DIN 965, A4 stainless steel, plain
Thermal transfer printer MG3
Fire protection duct outer corner I30/I60/I90/I120
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, zinc-plated, blue passivated (A2K)
System insert 4.4.1, drift punch and striking tool