PinPuller® power pulling electrodes
PinPuller Power pulling electrodes single-row
PULLELTRD-PINPULLER-POWER-20FOLD
PIN PULLER
Register now and access more than 125,000 products
Broad range of applications:
- Heavy slide hammer
- Pulling attachment for straightening jig
- Pulling bar
The grid grooves allow secure attachment of the pulling cross piece at any desired position
Individual electrodes are quick to weld on and easy to remove by twisting
Saves working time
Multiple electrodes at intervals of only 9 mm ensure optimum force distribution
In contrast to wiggle wire, pin electrodes can be welded on more than 500 times
Each electrode has an insulated bearing and so only requires minimal welding power, reducing the heat transferred to the sheet metal
Prior to initial use, the brass coating must be removed from the tips of the electrodes.
Datasheets(X)
Length | 182 mm |
Product weight (per item) | 237.000 g |
Last viewed
Hexagonal bolt with thread up to the head ISO 4017, steel 12.9, plain
WÜPLAST® pan head screw with Z recessed head
Countersunk slotted head screw, Z DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)
SDUCR-07 insert holder assortment 4 pieces, made from steel with internal cooling
MS 12-A cordless multi cutter
Cleaning brush with M6 WIT-RMB connecting thread
Counter nut, brass PG
Tapered pin, unhardened DIN 1, plain steel, unhardened, design A (ground)
Cheese head screw with hexagon socket ISO 4762, steel, strength class 8.8, zinc-nickel-plated, silver (ZNSHL)
Knob cylinder 3KS