Pipe and fastening clamp Multifix
Pipe and fastening clamp Multifix DIN 3016 ST/EPDM
PIPCLMP-RSGU-EPDM-BLACK-W20MM-D42MM
Register now and access more than 125,000 products
Reinforced tabs
The support washers prevent the tabs from tearing under extreme mechanical stress
Rubber profile
- Vibration protection
- Protection against water intrusion
- Sound-absorbing
Resistant to:
- Abrasion (good)
- Weathering (very good)
- Ozone (very good)
- Ageing (very good)
- Light (good)
- Alcohol (good)
- Acids (good)
- Alkaline solutions (good)
Datasheets(X)
CAD data (available after login)
For clamping and fastening pipes, cables, cable harnesses, protective pipes, hoses and other lines on engine mounts, bodywork, beams, assemblies, machines etc.
 | |
Width (B) | 20 mm |
Nominal diameter (D) | 42 mm |
Flange hole (d1) | M8 |
Distance centre of pipe to centre of hole (S) | 35.5 mm |
Standards | DIN 3016 |
Material | Steel |
Surface | Zinc plated |
Material of rubber profile | EPDM |
Colour of rubber profile | Black |
Shore A hardness | 70 +/- 5 |
Min./max. temperature resistance | -40 to 120 °C |
Last viewed
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
Hexagonal bolt with shank
Low-cut safety shoes, S1
VARIFIX® hammer head fastener standard fix Pre-assembled with nut and washer, zinc-plated
Stud with threaded end ≈ 2d
Hexagonal nut with flange and clamping piece (all-metal) according to MBN standard
Hexagon head bolt with shank for pressure container construction (PED) ISO 4014, steel 25CrMo4, plain
LED bedroom reading light BLL-12-2 Screw-on
Top-hat/support rail
Capstan screws with slot DIN 404, steel 5.8, zinc-plated, blue passivated (A2K)