Pipe and fastening clamp Multifix
Pipe and fastening clamp Multifix DIN 3016 ST/EPDM
PIPCLMP-RSGU-EPDM-BLACK-W25MM-D85MM
Register now and access more than 125,000 products
Reinforced tabs
The support washers prevent the tabs from tearing under extreme mechanical stress
Rubber profile
- Vibration protection
- Protection against water intrusion
- Sound-absorbing
Resistant to:
- Abrasion (good)
- Weathering (very good)
- Ozone (very good)
- Ageing (very good)
- Light (good)
- Alcohol (good)
- Acids (good)
- Alkaline solutions (good)
Datasheets(X)
CAD data (available after login)
For clamping and fastening pipes, cables, cable harnesses, protective pipes, hoses and other lines on engine mounts, bodywork, beams, assemblies, machines etc.
 | |
Width (B) | 25 mm |
Nominal diameter (D) | 85 mm |
Flange hole (d1) | M10 |
Distance centre of pipe to centre of hole (S) | 60 mm |
Standards | DIN 3016 |
Material | Steel |
Surface | Zinc plated |
Material of rubber profile | EPDM |
Colour of rubber profile | Black |
Shore A hardness | 70 +/- 5 |
Min./max. temperature resistance | -40 to 120 °C |
Last viewed
Universal helmet mount For LED torches with explosion protection
Hydraulic connections on the hose side With female thread and screw coupling
Hex head screw with thread up to head DIN 933, steel 8.8U, hot-dip galvanised (hdg)
Mounting clip AMO® clip assortment 400 pcs
Hexagonal bolt with thread up to the head ISO 4017, brass, nickel-plated
Hexagonal bolt with shank DIN 931, steel 10.9, plain
Hammer tacker ST 54
Lamp key For LED Euro warning lamps and LED warning lamps
Universal holder Ø 7 mm With stainless steel sleeve, snap ring and permanent magnet
ASSY® 4 A2 RCS fittings screw A2 stainless steel plain full thread raised countersunk head