Pipe and fastening clamp Multifix
Pipe and fastening clamp Multifix DIN 3016 ST/EPDM
PIPCLMP-RSGU-EPDM-BLACK-W6MM-D9MM
Register now and access more than 125,000 products
Reinforced tabs
The support washers prevent the tabs from tearing under extreme mechanical stress
Rubber profile
- Vibration protection
- Protection against water intrusion
- Sound-absorbing
Resistant to:
- Abrasion (good)
- Weathering (very good)
- Ozone (very good)
- Ageing (very good)
- Light (good)
- Alcohol (good)
- Acids (good)
- Alkaline solutions (good)
For clamping and fastening pipes, cables, cable harnesses, protective pipes, hoses and other lines on engine mounts, bodywork, beams, assemblies, machines etc.
 | |
Width (B) | 9 mm |
Nominal diameter (D) | 6 mm |
Flange hole (d1) | M4 |
Distance centre of pipe to centre of hole (S) | 8.7 mm |
Standards | DIN 3016 |
Material | Steel |
Surface | Zinc plated |
Material of rubber profile | EPDM |
Colour of rubber profile | Black |
Shore A hardness | 70 +/- 5 |
Min./max. temperature resistance | -40 to 120 °C |
Datasheets (1)
CAD data (available after login)
Certificates/ Documents (0)
Last viewed
pias® drilling screw, round head with collar and AW drive
System drawer cabinet 16.6: 1037x603 mm
Hexagon bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
K insulation pipe clamp with permanently integrated damping insert
Blind rivet, high-strength flat head
Line marker
PLUS roof railing system tub with toeboard
FH 61 panic mortise lock
Circlips for shaft, shape A
Raised countersunk head screw with recessed head, H ISO 7047, steel 4.8, zinc-plated thick-film passivated (ZSML)
