Pipe cable lug Without inspection hole
Tubular cable lug tin-plated w/o inspection hole
TUBCBLLUG-CU-(J2N)-M10-16SMM
Register now and access more than 125,000 products
- Material: Electrolytic copper pipe according to EN 13600
- Surface: zinc-plated
- Heat resistant up to +125°C
- Version: without inspection hole
Datasheets(X)
For compressions for which no DIN compression cable lugs are prescribed!
 | |
Wire cross section | 16 mm² |
Flange hole | M10 |
Wire diameter (d1) | 5.5 mm |
Diameter of hole (d2) | 10.5 mm |
Distance between sleeve end and centre of hole (e) | 31 mm |
Sleeve length (a) | 13 mm |
Width (b) | 17 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, A4-070 stainless steel, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Identification rings, PVC
Compound plain bush
HSCo Multi Special machine tap for blind holes DIN 376
VARIFIX® hammer head fastener standard fix Pre-assembled with nut and washer, zinc-plated
Ducting clamp Part 1 – Light series
Stretch X vest
Circlip pliers, shape A for shaft circlips