Pipe cable lug Without inspection hole
Tubular cable lug tin-plated w/o inspection hole
TUBCBLLUG-CU-(J2N)-M10-25SMM
Register now and access more than 125,000 products
- Material: Electrolytic copper pipe according to EN 13600
- Surface: zinc-plated
- Heat resistant up to +125°C
- Version: without inspection hole
Datasheets(X)
For compressions for which no DIN compression cable lugs are prescribed!
 | |
Wire cross section | 25 mm² |
Flange hole | M10 |
Wire diameter (d1) | 7 mm |
Diameter of hole (d2) | 10.5 mm |
Distance between sleeve end and centre of hole (e) | 34.5 mm |
Sleeve length (a) | 15 mm |
Width (b) | 18 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Hexagonal bolt with shank
PVC sheathing system
HSCo green-ring machine tap for blind holes DIN 371/376
Hygienic design ball-head screw
MW mobile assembly workbench
Die For standard metric ISO thread HSCo Multi Performance
Abrasive/sticker wheel Mirka Q Silver
ASSY® 4 CSMP universal screw Zinc-plated steel full thread 90° milling pocket head
Pan head self-tapping screws with recessed head ISO 7049, A4-70 stainless steel, plain