Pipe cable lug Without inspection hole
Tubular cable lug tin-plated w/o inspection hole
TUBCBLLUG-CU-(J2N)-M10-50SMM
Register now and access more than 125,000 products
- Material: Electrolytic copper pipe according to EN 13600
- Surface: zinc-plated
- Heat resistant up to +125°C
- Version: without inspection hole
Datasheets(X)
For compressions for which no DIN compression cable lugs are prescribed!
 | |
Wire cross section | 50 mm² |
Flange hole | M10 |
Wire diameter (d1) | 10 mm |
Diameter of hole (d2) | 10.5 mm |
Distance between sleeve end and centre of hole (e) | 39 mm |
Sleeve length (a) | 19 mm |
Width (b) | 20 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Hexagonal bolt with shank
EPS profile double cylinder
W-VIZ-IG internally threaded anchor, A4 stainless steel for W-VIZ-IG/A4 injection systems (concrete)
Stretch X ladies' trousers
Straight push-in fitting with round body
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Welder's gloves
High-performance anchor with threaded bolt
Vulcanised fibre disc Klingspor CS 565