Pipe cable lug Without inspection hole
Tubular cable lug tin-plated w/o inspection hole
TUBCBLLUG-CU-(J2N)-M12-150SMM
Register now and access more than 125,000 products
- Material: Electrolytic copper pipe according to EN 13600
- Surface: zinc-plated
- Heat resistant up to +125°C
- Version: without inspection hole
Datasheets(X)
For compressions for which no DIN compression cable lugs are prescribed!
 | |
Wire cross section | 150 mm² |
Flange hole | M12 |
Wire diameter (d1) | 16.5 mm |
Diameter of hole (d2) | 13.2 mm |
Distance between sleeve end and centre of hole (e) | 58 mm |
Sleeve length (a) | 30 mm |
Width (b) | 31 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Safety boots, S2
Straight screw fitting, metric, PA6 MOD BS SGA
Work trousers
Hexagonal bolt with pin and small hexagon
Low-cut safety shoes, S1
SNAP marker
Nozzle set For the REFILLOmat system
Long-sleeved polo shirt BCPWI13
W-RD plastic frame anchor Without collar in natural colour. Without approval
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain