Pipe cable lug Without inspection hole
Tubular cable lug tin-plated w/o inspection hole
TUBCBLLUG-CU-(J2N)-M12-185SMM
Register now and access more than 125,000 products
- Material: Electrolytic copper pipe according to EN 13600
- Surface: zinc-plated
- Heat resistant up to +125°C
- Version: without inspection hole
Datasheets(X)
For compressions for which no DIN compression cable lugs are prescribed!
 | |
Wire cross section | 185 mm² |
Flange hole | M12 |
Wire diameter (d1) | 19.4 mm |
Diameter of hole (d2) | 13.2 mm |
Distance between sleeve end and centre of hole (e) | 65 mm |
Sleeve length (a) | 30 mm |
Width (b) | 36.2 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
SC 90° countersink DIN 335C
Lever valve plug
CERAfix® 316 sealing tape
Cable ties with plastic latch closure – industrial quality
Countersunk slotted head screw, Z DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, plain
Hexagon nut BILOC self-locking low profile
Clamping pin/clamping sleeve ISO 13337 spring steel plain
Wood screw, DIN 96 Half moon head with slot
Multinorm jacket