Pipe cable lug Without inspection hole
Tubular cable lug tin-plated w/o inspection hole
TUBCBLLUG-CU-(J2N)-M12-240SMM
Register now and access more than 125,000 products
- Material: Electrolytic copper pipe according to EN 13600
- Surface: zinc-plated
- Heat resistant up to +125°C
- Version: without inspection hole
Datasheets(X)
For compressions for which no DIN compression cable lugs are prescribed!
 | |
Wire cross section | 240 mm² |
Flange hole | M12 |
Wire diameter (d1) | 21 mm |
Diameter of hole (d2) | 13.2 mm |
Distance between sleeve end and centre of hole (e) | 72 mm |
Sleeve length (a) | 35 mm |
Width (b) | 39 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Multi-purpose level CLIP-O-FLEX® For workstations manufactured from the Würth aluminium profile system WAPS®
Threaded rod DIN 976, A2-70 stainless steel, shape A
AL 420 drive handle
Quick Fresh Active air-conditioning disinfection
HSS special spiral formwork drill bit
Work jacket
Cable gland With lock nut
Polyester coils, 5.3 mm, wound 3-way twisted with Powerglider
Quick-mounting system For floor panels
Stud with head, shape B