Pipe cable lug Without inspection hole
Tubular cable lug tin-plated w/o inspection hole
TUBCBLLUG-CU-(J2N)-M12-300SMM
Register now and access more than 125,000 products
- Material: Electrolytic copper pipe according to EN 13600
- Surface: zinc-plated
- Heat resistant up to +125°C
- Version: without inspection hole
Datasheets(X)
For compressions for which no DIN compression cable lugs are prescribed!
 | |
Wire cross section | 300 mm² |
Flange hole | M12 |
Wire diameter (d1) | 23.5 mm |
Diameter of hole (d2) | 13.2 mm |
Distance between sleeve end and centre of hole (e) | 87 mm |
Sleeve length (a) | 44 mm |
Width (b) | 43 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Floor-levelling mass CERAfix® 200-2
2-component adhesive AL-1
EPS profile thumbturn cylinder
Locking system DUAL
EPS profile double cylinder
Connection distributor cabinet W-AVEV 63/211-6/V2/X
Twist drill bit HSCo DIN 338 type RN bronze point thinning
Safety screw with hexalobular head and pin Similar to ISO 10642 because of TX drive, A2 stainless steel, plain
PE disposal bag with spunbonded fabric
VARIFIX® hammer head fastener standard fix Pre-assembled with nut and washer, zinc-plated