Pipe cable lug Without inspection hole
Tubular cable lug tin-plated w/o inspection hole
TUBCBLLUG-CU-(J2N)-M12-50SMM
Register now and access more than 125,000 products
- Material: Electrolytic copper pipe according to EN 13600
- Surface: zinc-plated
- Heat resistant up to +125°C
- Version: without inspection hole
Datasheets(X)
For compressions for which no DIN compression cable lugs are prescribed!
 | |
Wire cross section | 50 mm² |
Flange hole | M12 |
Wire diameter (d1) | 10 mm |
Diameter of hole (d2) | 13.2 mm |
Distance between sleeve end and centre of hole (e) | 40 mm |
Sleeve length (a) | 19 mm |
Width (b) | 23 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Hexagonal bolt with thread up to head for pressure container construction DIN EN ISO 4017, A4 stainless steel
Grating/net sanding triangle Mirka Abranet Ace HD
Planishing hammer
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Safety boots, S3
SH-6 hard hat With helmet shell that extends downwards for neck protection
Edge protection profile For Compact workshop trolleys
Insert, tapered sealing EN1254, red brass, 4381
Telescopic extension rod With safety device
Interior connector, stainless steel