Pipe cable lug Without inspection hole
Tubular cable lug tin-plated w/o inspection hole
TUBCBLLUG-CU-(J2N)-M12-95SMM
Register now and access more than 125,000 products
- Material: Electrolytic copper pipe according to EN 13600
- Surface: zinc-plated
- Heat resistant up to +125°C
- Version: without inspection hole
Datasheets(X)
For compressions for which no DIN compression cable lugs are prescribed!
 | |
Wire cross section | 95 mm² |
Flange hole | M12 |
Wire diameter (d1) | 13.5 mm |
Diameter of hole (d2) | 13.2 mm |
Distance between sleeve end and centre of hole (e) | 49 mm |
Sleeve length (a) | 25 mm |
Width (b) | 26 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Allen key, hexagon socket with ball head Extra-long design
Handle hole L-shaped
Joint plate for system workbench foot
Sliding door shell-type handle oval
Twist drill bit HSCo DIN 338 type RN MAGMA
System stacking cabinet For ORSY® system case 8.4.1
Hexagonal nut, low profile with clamping piece (non-metal insert), imperial
GEFU® thread-rolling screw With Taptite 2000® thread, hexagon head with collar and hexalobular drive (TXplus)
Hexagonal bolt with thread up to the head DIN 933, steel 10.9, zinc-plated, blue passivated (A2K)
Slotted countersunk head screw ISO 2009, steel 4.8, zinc-plated, blue passivated (A2K)