Pipe cable lug Without inspection hole
Tubular cable lug tin-plated w/o inspection hole
TUBCBLLUG-CU-(J2N)-M16-120SMM
Register now and access more than 125,000 products
- Material: Electrolytic copper pipe according to EN 13600
- Surface: zinc-plated
- Heat resistant up to +125°C
- Version: without inspection hole
For compressions for which no DIN compression cable lugs are prescribed!
 | |
Wire cross section | 120 mm² |
Flange hole | M16 |
Wire diameter (d1) | 15 mm |
Diameter of hole (d2) | 17 mm |
Distance between sleeve end and centre of hole (e) | 53 mm |
Sleeve length (a) | 26 mm |
Width (b) | 30 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Safety boots, S3
Hammer drill bit Max Quadro-L Vario
Hole saw Ruko tungsten carbide multigrade hole saw
NP profile double cylinder In 6-pin system
Sharpening stone For diamond cutting discs, cup wheels and core drill bits (excl. PCD)
Leather protective glove Ejendals TEGERA® 115
Injector socket for Siemens
Hexagon Socket Head Cap Screw
Threaded fitting, steel, with ball joint
Cylindrical grooved pin with chamfer ISO 8740, steel, plain
