Pipe cable lug Without inspection hole
Tubular cable lug tin-plated w/o inspection hole
TUBCBLLUG-CU-(J2N)-M16-95SMM
Register now and access more than 125,000 products
- Material: Electrolytic copper pipe according to EN 13600
- Surface: zinc-plated
- Heat resistant up to +125°C
- Version: without inspection hole
Datasheets(X)
For compressions for which no DIN compression cable lugs are prescribed!
 | |
Wire cross section | 95 mm² |
Flange hole | M16 |
Wire diameter (d1) | 13.5 mm |
Diameter of hole (d2) | 17 mm |
Distance between sleeve end and centre of hole (e) | 52 mm |
Sleeve length (a) | 25 mm |
Width (b) | 28 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Work jacket
Logo IV work T-shirt
GEFU® thread-rolling screw With Taptite 2000® thread, hexagon head with collar
Three prong knob with perforated blank bushing Full hub
Safety boots, S1
Hook link For plastic chains
Sanding system dust-free Useit® Superpad SG
EPS profile double cylinder
Work dungarees
Intermediate layer for ISO S clamping system