Pipe cable lug Without inspection hole
Tubular cable lug tin-plated w/o inspection hole
TUBCBLLUG-CU-(J2N)-M5-16SMM
Register now and access more than 125,000 products
- Material: Electrolytic copper pipe according to EN 13600
- Surface: zinc-plated
- Heat resistant up to +125°C
- Version: without inspection hole
Datasheets(X)
For compressions for which no DIN compression cable lugs are prescribed!
 | |
Wire cross section | 16 mm² |
Flange hole | M5 |
Wire diameter (d1) | 5.5 mm |
Diameter of hole (d2) | 5.3 mm |
Distance between sleeve end and centre of hole (e) | 26 mm |
Sleeve length (a) | 13 mm |
Width (b) | 12 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Safety boots Grado X S3
Cut protection glove Ejendals TEGERA® 516
Leather protective glove Ejendals TEGERA® 360
Side tool holder For workshop trolleys
DIN 1474 stainless steel A1 plain
Low-cut safety shoes S1 ESD
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagon socket set screw with truncated cone ISO 4026 A2 stainless steel 21H, plain
Joist hanger 2.0 mm One piece
Profile half cylinder EPS