Pipe cable lug Without inspection hole
Tubular cable lug tin-plated w/o inspection hole
TUBCBLLUG-CU-(J2N)-M6-35SMM
Register now and access more than 125,000 products
- Material: Electrolytic copper pipe according to EN 13600
- Surface: zinc-plated
- Heat resistant up to +125°C
- Version: without inspection hole
Datasheets(X)
For compressions for which no DIN compression cable lugs are prescribed!
 | |
Wire cross section | 35 mm² |
Flange hole | M6 |
Wire diameter (d1) | 8.5 mm |
Diameter of hole (d2) | 6.4 mm |
Distance between sleeve end and centre of hole (e) | 32.5 mm |
Sleeve length (a) | 17 mm |
Width (b) | 17 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Slotted countersunk head screw DIN 963, A4 stainless steel, plain
Hexagon head bolt with shank and fine thread ISO 8765, steel 8.8, zinc flake, silver (ZFSHL)
Hexagon nut, low profile with fine thread ISO 8675, steel 5, plain
Pipe cable lug Without inspection hole
Dry sandpaper strips
Brass, metric lock nut in accordance with EN 60423 for EMC cable glands
Vulcanised fibre disc CS 570 Klingspor
Double hook For square holes in perforated plates, workshop trolleys and the ORSY®1 shelving systems
Locking system, DPS
Knurled nut, high profile