Pipe cable lug Without inspection hole
Tubular cable lug tin-plated w/o inspection hole
TUBCBLLUG-CU-(J2N)-M6-70SMM
Register now and access more than 125,000 products
- Material: Electrolytic copper pipe according to EN 13600
- Surface: zinc-plated
- Heat resistant up to +125°C
- Version: without inspection hole
Datasheets(X)
For compressions for which no DIN compression cable lugs are prescribed!
 | |
Wire cross section | 70 mm² |
Flange hole | M6 |
Wire diameter (d1) | 12 mm |
Diameter of hole (d2) | 6.4 mm |
Distance between sleeve end and centre of hole (e) | 43 mm |
Sleeve length (a) | 21 mm |
Width (b) | 24 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Helical insert W.TEC® INSERT COIL Screw Grip
Cylindrical pin, hardened DIN 6325, steel, plain
Hexagon Socket Head Cap Screw with centre, with low head
Cordless angle grinder AWS 18-125 P COMPACT M-CUBE
Hexagon nut, high profile with clamping piece (non-metal insert), imperial
Jacket Planam Highline
C 6.3 TX bit (1/4 inch)
Hexagonal bolt with thread up to the head ISO 4017, brass, plain
ECOLINE cleaning paper
Hexagon Socket Head Cap Screw