Pipe cable lug Without inspection hole
Tubular cable lug tin-plated w/o inspection hole
TUBCBLLUG-CU-(J2N)-M8-120SMM
Register now and access more than 125,000 products
- Material: Electrolytic copper pipe according to EN 13600
- Surface: zinc-plated
- Heat resistant up to +125°C
- Version: without inspection hole
Datasheets(X)
For compressions for which no DIN compression cable lugs are prescribed!
 | |
Wire cross section | 120 mm² |
Flange hole | M8 |
Wire diameter (d1) | 15 mm |
Diameter of hole (d2) | 8.4 mm |
Distance between sleeve end and centre of hole (e) | 51 mm |
Sleeve length (a) | 26 mm |
Width (b) | 28 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
ISO insert holder with P clamping system for TN indexable inserts
Collated nails and gas cartridge NG CS-2/3
Superglue Klebfix Easy Pen
Hexagon head bolt with thread up to head
Fire protection duct outer corner I30/I60/I90/I120
Sample case TIROS
Countersunk head screw with recessed head H
Identification rings, PVC
Crimp cable lug, push connector PVC-insulated
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain