Pipe cable lug Without inspection hole
Tubular cable lug tin-plated w/o inspection hole
TUBCBLLUG-CU-(J2N)-M8-70SMM
Register now and access more than 125,000 products
- Material: Electrolytic copper pipe according to EN 13600
- Surface: zinc-plated
- Heat resistant up to +125°C
- Version: without inspection hole
Datasheets(X)
For compressions for which no DIN compression cable lugs are prescribed!
 | |
Wire cross section | 70 mm² |
Flange hole | M8 |
Wire diameter (d1) | 12 mm |
Diameter of hole (d2) | 8.4 mm |
Distance between sleeve end and centre of hole (e) | 43 mm |
Sleeve length (a) | 21 mm |
Width (b) | 24 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Red brass extensions With DVGW (German Technical and Scientific Association for Gas and Water) GW 393 approval (sizes from ½ inch x 17.5 mm)
HSCo Multi Performance machine tap for through holes DIN 371/376
Assembly aid for SlideLine 55 Plus damping activator
Tungsten carbide bur Klingspor HF 100 C
Safety boots, S3
Hexagonal bolt with shank DIN 931, steel 10.9, zinc-plated, blue passivated (A2K)
BASIC 8.8 system workshop trolley
Sport Plus S3 FLEXITEC® ESD safety boots
Hexagon head sealing plug with collar DIN 910, A4 stainless steel, plain
Circlip DIN 472