Pipe cable lug with inspection hole
Tubular cable lug with inspection hole (common)
TUBCBLLUG-INSPHO-CU-(J2N)-M12-150SMM
Register now and access more than 125,000 products
The user must check the inserted cable (by means of a pull-out test, if necessary).
Datasheets(X)
For multi-strand round conductors e.g. in accordance with DIN EN 60228 Class 2 and 5
For round-pressed sector-shaped cables
 | |
Wire cross section | 150 mm² |
Flange hole | M12 |
Wire diameter (d1) | 16.5 mm |
Diameter of hole (d2) | 13.2 mm |
Distance between sleeve end and centre of hole (e) | 58.0 mm |
Sleeve length (a) | 30.0 mm |
Width (b) | 31.0 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Stud with small head DIN 1434, steel, zinc-plated, blue passivated (A2K)
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)
Feather key, low profile DIN 6885, steel, plain, shape A
Pan Head screw with hexalobular head ISO 14583, steel, strength class 8.8, zinc-nickel-plated, silver (ZNSHL)
Round head screw with square neck
Speedcut Universal solid carbide end mill, short, optional, four blades, uneven angle of twist gradient, HB shank
Side basket For SUB Flex floor unit extension
Hexagonal bolt, with thread to head and fine thread DIN 961, steel 12.9, plain
Universal protector GPN 950 Polyethylene (PE-LD), natural