Pipe cable lug with inspection hole
Tubular cable lug with inspection hole (common)
TUBCBLLUG-INSPHO-CU-(J2N)-M3-1,2SMM
Register now and access more than 125,000 products
The user must check the inserted cable (by means of a pull-out test, if necessary).
Datasheets(X)
For multi-strand round conductors e.g. in accordance with DIN EN 60228 Class 2 and 5
For round-pressed sector-shaped cables
 | |
Wire cross section | 1.2 mm² |
Flange hole | M3 |
Wire diameter (d1) | 1.4 mm |
Diameter of hole (d2) | 3.2 mm |
Distance between sleeve end and centre of hole (e) | 13.7 mm |
Sleeve length (a) | 7.1 mm |
Width (b) | 4.5 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Workshop trolley WE bodywork equipped 471 pcs
Low-cut safety shoes S3 Ejendals Jalas 7148 Zenit Evo
Sweat band Sundström R06-0602
Nail setting tool for set stud M6
Diamond Cup Wheel, Abrasive
Paint spray Quattro
W-PS autoclaved aerated concrete screw with pan head, zinc-plated steel for secondary attachments in autoclaved aerated concrete
Partial exoskeleton Ottobock CX Cool Sleeves cool sleeve arm
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, A4-070 stainless steel, plain
Countersunk head screw with hexalobular head, assortment