Pipe cable lug with inspection hole
Tubular cable lug with inspection hole (common)
TUBCBLLUG-INSPHO-CU-(J2N)-M4-2,5SMM
Register now and access more than 125,000 products
The user must check the inserted cable (by means of a pull-out test, if necessary).
Datasheets(X)
For multi-strand round conductors e.g. in accordance with DIN EN 60228 Class 2 and 5
For round-pressed sector-shaped cables
 | |
Wire cross section | 2.5 mm² |
Flange hole | M4 |
Wire diameter (d1) | 2.40 mm |
Diameter of hole (d2) | 4.30 mm |
Distance between sleeve end and centre of hole (e) | 17.90 mm |
Sleeve length (a) | 8 mm |
Width (b) | 7.50 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Work trousers
Plastic frame anchor W-UR 10 XS W-UR 10 XS for use in perforated brick with small chambers and thin webs in conjunction with the AMO Combi screw
Insulation holder W-DH
Cylindrical pin, hardened DIN 6325, steel, plain
Eco S3 safety boots
Hexagonal bolt with shank DIN 931, steel 8.8, zinc-plated, blue passivated (A2K)
Wood screw Hexagon head DIN 571, steel zinc-plated blue
Cable ties with plastic latch closure – industrial quality
Work dungarees
Round head screw with square neck DIN 603, steel 8.8, zinc-plated, yellow chromated (A3C)