Pipe cable lug with inspection hole
Tubular cable lug with inspection hole (common)
TUBCBLLUG-INSPHO-CU-(J2N)-M5-2,5SMM
Register now and access more than 125,000 products
The user must check the inserted cable (by means of a pull-out test, if necessary).
Datasheets(X)
For multi-wire round conductors, such as compliant with DIN EN 60228 Class 2
for round-pressed sector cables
 | |
Wire cross section | 2.50 mm² |
Flange hole | M5 |
Wire diameter (d1) | 2.3 mm |
Diameter of hole (d2) | 5.8 mm |
Distance between sleeve end and centre of hole (e) | 16.3 mm |
Sleeve length (a) | 7.1 mm |
Width (b) | 8.3 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Hexagon socket set screw with truncated cone ISO 4026 A4 stainless steel 21H, plain
Threaded rod
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Cheese head screw with hexagon socket head and shoulder ISO 7379, steel 12.9, plain, tolerance f9
Flat head drilling screws with recessed head and self-tapping screw thread
WÜPOFAST® zinc-plated blue chipboard screw
Hexagonal bolt with shank ISO 4014, steel 10.9, plain
Low-cut safety shoes, S3
Jacket Planam MG 260
Hexagonal bolt with thread up to the head