Pipe cable lug with inspection hole
Tubular cable lug with inspection hole (common)
TUBCBLLUG-INSPHO-CU-(J2N)-M8-2,5SMM
Register now and access more than 125,000 products
The user must check the inserted cable (by means of a pull-out test, if necessary).
For multi-strand round conductors e.g. in accordance with DIN EN 60228 Class 2 and 5
For round-pressed sector-shaped cables
 | |
Wire cross section | 2.50 mm² |
Flange hole | M8 |
Wire diameter (d1) | 2.3 mm |
Diameter of hole (d2) | 8.6 mm |
Distance between sleeve end and centre of hole (e) | 19 mm |
Sleeve length (a) | 8 mm |
Width (b) | 11.5 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
GEFU® thread-rolling screw With Taptite 2000® thread, cylinder head and hexalobular drive
Raised countersunk head screw with recessed head, H ISO 7047, steel 8.8, zinc-nickel-plated, silver (ZNSHL)
Metric combination wrench with POWERDRIV®
Threaded rod DIN 976, steel 4.8, plain, shape A
Complete motor
Abrasive fleece roll VSM KV301
Recessed LED light EBL-24-11 For recessed installation
Compartment separator For drawer cabinets
Fuse holder For flat blade fuses
Extension For WE XXL workshop trolleys
